Steel Barrier - 610 Double - Vanguard Safety Australia Skip to content

Steel Barrier - 610 Double.

CODE:

Our 610mm high double rail steel barrier is a certified safety barrier system used for traffic management and protecting against forklift damage to buildings and assets.

Double rail offers more protection and a higher strength rating. Not recommended for walkways due to its lower height.

  • Modular system can be configured to your required site layout
  • Post centres of 1.1m ensure that every impact is absorbed by a post
  • The 610mm high double rail stops 7T at 7.4km/h
  • Compliant with AS/NZS 1170.1 Section 3.8. (Certification available by request)
  • Can be installed with pedestrian handrail mounted to barrier

Options
Spec Sheets
Rating Table
Options
Image
Code
Description
610-2
Steel Barrier 610mm High - Double
610-2H
Pedestrian Handrail
Spec Sheets
Image
Title
Size
Download
Walksafe-Traffic-Barrier-Installation-Manual.pdf
1.1MB
Download
Walksafe-Traffic-Barrier.pdf
466kB
Download
Vanguard-Group-Catalogue-Page-32-Tru-Gard-Barrier-610-Double
82kB
Download
Rating Table

FAQs.

What is the ideal application for steel barriers?

Our Steel barrier is perfect for any application where you need to keep people safe from forklift or vehicle operating areas.

Can access to a safe crossing area be allowed for?

Yes. Our Steel pause gates are perfect for allowing access to a safe crossing area. Pause gates can be fitted anywhere along the length of the barrier.

Are steel barriers customisable for my layout?

Absolutely. Our steel barriers are very flexible and adaptable to suit your layout.

Are steel barriers able to withstand vehicle impacts?

Yes. Various height and guard rail options are available to suit your application, ask us for the best option for your needs.

Can steel barriers be bolted to asphalt?

No, our steel barriers must be bolted to concrete, so if the existing surface is asphalt, you will need to excavate and pour concrete footings to install the barrier onto. Concrete footers need to be a minimum of 25MPA and 400mm wide x 300mm deep. If you would prefer to install individual footers for each post, these need to be a minimum of 400(L)x400(W)x300(D)mm per post.

You may also be interested in

Used with the Hand Rail System to prevent a person’s feet or tools slipping through and over the edge.
The 910 high triple rail provides the highest strength rating to protect pedestrians and assets from larger vehicles impacts.
The 910 high double rail offers more protection and a higher strength rating than the single rail units, the bottom rail can be placed at ground level for protection against fork tines.
The 910 high single rail has a moderate strength rating to protect pedestrians and assets against impacts from light vehicles.

What our clients are saying.

Hear what our customers have to say about working with Vanguard to get their safety projects completed.

First class from initial conversation through to post launch. We will definitely be using Vanguard Safety again in the future. The level of care and commitment to us was 10/10.

Andy Maguire
Capital Project Manager, Suntory Oceania

Extremely helpful and able to visualise what we required onsite almost immediately. Vanguard Safety was able to source parts quickly and we were able to complete installation on a non-operational day, which allows us to remain open during normal working hours.

Courtenay Brock-Kareroa
Operations Supervisor, Cleanaway Waste Management

Dealing with Vanguard Safety was a great experience - they offered great advice and explained how the process would flow. The task was completed as requested and on time; quality of work was exceptional and all housekeeping was managed well.

Les Waterman
Regional HSSE Manager, Toll Group

How can we help?

With over 45 years experience on the team, we have the knowledge and experience required to offer you the right solution.

Enquiry.

Quick quote.

Book a discovery call.